The Renesas RA4E1 group of MCUs is a family of high-performance microcontrollers, using the Arm® Cortex®-M33 core with TrustZone. Built on a highly efficient 40nm process, the RA4E1 MCU group is supported by an open and flexible ecosystem concept, the Flexible Software Package (FSP), and is the perfect entry point microcontroller into the RA MCU family.
https://www.futureelectronics.com/resources/featured-products/renesas-ra4e1-series-microcontrollers
TAIYO YUDEN’s multilayer ceramic capacitors meet the requirements of advanced technologies and production systems by utilizing innovative materials, higher capacity, and size reduction. These MLCC Capacitors are designed with an innovative thinning sheet technology that enables process control at the particle level, which allows for a higher capacity while reducing size.
The Panasonic PAN9520 is a 2.4 GHz ISM band Wi-Fi embedded module based on Espressif ESP32-S2. Including the powerful Xtensa® 32-bit LX7 CPU, the PAN9520 features an integrated chip antenna and QSPI memory which enables the RF Module to be used in a variety of stand-alone or host-controlled applications.
https://www.futureelectronics.com/resources/featured-products/panasonic-pan9520-series
Infineon Motor Control Solutions enable reduced power losses and an increase in system efficiency without compromising space. These solutions, optimized for motor control systems in automotive, consumer and industrial applications, match the increasing need for longer product lifecycles by the generation, as well as easy integration of required control algorithms.
Infineon’s TLE956x Motor System IC family offers high integration and high performance with optimized system cost for DC motor control applications. It combines half-bridge gate drivers with power and communication supply.
https://www.futureelectronics.com/npi/infineon-tle956x-motix-sbc-motor-system-ic
Microcontroller manufacturers and programmable 8 bit microcontrollers. Wireless, usb, lcd, pic, embedded and low power 8 bit microcontrollers. What is an 8 bit microcontroller and its programming software.
The Panasonic PAN1740A Series is a RF Module offering a reduced boot time and supporting up to eight (8) connections to allow greater flexibility to create more advanced applications. The PAN1740A is an optimized version of Panasonic's existing PAN1740 Series Module.
The Hirose Electric DF40 series connectors are slim FPC to board connectors that have a 0.4 mm pitch and 1.5 mm stacking height. They also feature a unique space-saving design, several stack heights available, strong contact forces and a reinforced structure.
https://www.futureelectronics.com/resources/featured-products/hirose-electric-df40-connector-series
Select from wide range of Wi-Fi® modules supporting IEEE 802.11a, 11b, 11g, 11n and 11ac 2×2 MIMO standard, 2.4GHz and 5GHz band for your wireless LAN and Bluetooth® 4.1/4.2/5.0/5.1 BR/EDR/LE communication. Murata’s Wi-Fi® + Bluetooth® modules are extremely small, so you have more space for you. Metal coat shielding technology eliminates the need for a metal can shielding and minimizes your cost and size. When space is at a premium, look to Murata to keep it small without sacrificing Wi-Fi®/Blue
https://www.futureelectronics.com/resources/featured-products/murata-wi-fi-bluetooth-modules
The onsemi RSL10 Smart Shot Color Camera combines cloud-based Artificial Intelligence (AI) with ultra-low-power triggered image capture to allow developers to create high-tech imaging applications. Imaging is captured automatically when triggered by various elements including time or environmental changes such as motion, humidity, or temperature.
https://www.futureelectronics.com/resources/featured-products/onsemi-rsl10-smart-shot-color-camera
The Renesas RA2E2 Group of MCUs, the RA Family’s entry line single-chip microcontroller, is based on the 48-MHz Arm® Cortex®-M23 core. Coupled with Renesas' innovative on-chip peripheral functions, the RA2E2 MCU Group offers ultra-low power operation and high speed serial communication with the smallest package options of 20-pin and 24-pin QFN and 16-pin wafer-level CSP. This satisfies the needs of cost-sensitive and space-constrained applications.
The onsemi NCP1680 is a CRM PFC controller IC designed to drive the bridgeless totem-pole PFC topology. Featuring a topology which eliminates the diode bridge present at the input of a conventional PFC circuit, the bridgeless totem-pole PFC greatly improves power stage efficiency.
https://www.futureelectronics.com/resources/featured-products/onsemi-ncp1680-crm-pfc-controller-ic
Taiyo Yuden High Dielectric MLCC offers a high capacitance value in a compact package. The High Dielectric MLCC reduces board space and improves power supply and power distribution network designs, offers low ESR for superior noise absorption and a monolithic structure for high reliability.
The onsemi RSL10 Sensor Development Kit is a compact and a comprehensive platform to easily develop IoT applications with leading sensor technology and the industry's lowest power Bluetooth® Low Energy SoC. Several applications including industrial wearables, asset monitoring, smart sensing solutions can be easily developed on this platform.
Nexperia’s SiGe rectifiers combine the high efficiency of Schottky rectifiers with the thermal stability of fast recovery diodes. Targeting automotive, server markets and communications infrastructure, the AEC-Q101 compliant rectifiers are of particular benefit in high-temperature applications.
https://www.futureelectronics.com/resources/featured-products/nexperia-silicon-germanium-rectifiers
Infineon StrongIRFET™ 2 Power MOSFETs are optimized for both low- and high-switching frequencies, the family supports a broad range of applications enabling design flexibility. The new portfolio is available in a variety of packages starting with TO-220 and continuing with TO-220 FullPAK, D2PAK, D2PAK 7-pin and DPAK.
https://www.futureelectronics.com/resources/featured-products/infineon-strong-irfet-2-power-mosfets
Altech Corporation’s Compact DIN rail switching power supply - the PSC Series - is up for the challenge of stringent DIN rail application demands. These 10W to 480W models are enclosed with fully isolated plastic or metal cases to prevent users from hazardous shock. The design complies with the compact requirements that the precious space on the industrial rail can be preserved effectively.
Automotive systems designs with STMicroelectronics’ extensive range of specific solutions for brushless motor control, Global Navigation Satellite System (GNSS), LED driver boards
https://www.futureelectronics.com/resources/featured-products/stmicroelectronics-automotive-feature
Abracon’s collection of surface-mount molded inductors range in package sizes and materials to meet a variety of power, inductance and operating temperature requirements. Each series features EMI shielding to prevent interference and disruption to neighboring circuitry. This selection of inductors can service most high-reliability DC-DC conversion topologies with superior power densities and efficiencies.
https://www.futureelectronics.com/resources/featured-products/abracon-molded-inductor-family
KYOCERA AVX antennas are available in standard and custom configurations using a wide variety of materials to ease antenna integration and maximize performance. These passive antennas establish benchmarks for speed, range, efficiency and reliability across a wide variety of applications, from mobile phones to Wi-Fi, Automotive, and the Internet of Things (IoT).
The I-PEX CABLINE® family of micro-coaxial connectors support power delivery and have the option of providing 360-degree EMC shielding (ZenShield®). The cables can be bundled to make it easy to route them through narrow spaces and hinges. The CABLINE® family is capable of handling high data rates such as USB4, Thunderbolt 3, eDP HBR3, PCIe Gen 3/4 and more.
A complete thermal solution requires not only the main method of heat transfer like a liquid cold plate or a heat sink, but also additional components for installation and optimal performance. Thermal Accessories include items like hardware to mount the cooling solution and heat sources together, thermally conductive insulation, and thermal interface materials.
https://www.futureelectronics.com/resources/featured-products/aavid-thermal-accessory-solutions
Dynasolis™ is Nichia’s Azure™ (Blue-Green) in combination with the award-winning H6 series emitter to allow for spectral tuning and color tuning.
The Nichia H6 family of LEDs delivers the highest multi-level boost in color rendition and efficacy while maintaining the outstanding lifetime. The H6 series delivers a color rendering index (CRI) of 90 while maintaining a level of efficacy seen in standard CRI 80 LEDs.
The Infineon XENSIV™ Photoacoustic Spectroscopy (PAS) CO2 Sensor provides superior accuracy level in an exceptionally small form factor making it the ideal solution for indoor air-quality monitoring stations, HVAC systems and IoT applications. To track the environment you are in - for improved health, productivity and overall well-being, the PAS CO2 sensor provides real-time, accurate measurements, while being more affordable and compact, overcoming the challenges of size and performance in exis
https://www.futureelectronics.com/resources/featured-products/infineon-xensiv-pas-co2-sensor
Infineon's Low-voltage motor control solutions complete eBook covers all the ins and outs of your electrical motor needs, so that you can spend less time focusing on upcoming legislations, CO2 regulations, the newest high-tech innovations and more. Rather, you can hit the market faster.
Lumileds Zero Worry Lead Time LEDs. Have absolute confidence that your LEDs will arrive on-time, when you need them, which allows you to focus on production and growing your business. Working with Lumileds, strategically invested in global inventory of select LUXEON LEDs. These inventories are readily accessible by Future Electronics sales teams around the world in real-time. This means they can plan your lead-times with confidence.
The Taoglas TGX.04 is a 4* 5G/4G MIMO cross-polarized omnidirectional dipole antenna with a wide bandwidth covering all worldwide sub 6GHz cellular bands from 400 to 6000MHz. It uses four dipole antennas to deliver the best possible throughput and quality improvements in transmitting and receiving signal levels, leading to better coverage and performance, especially in urban environments.
Laird Connectivity’s new Sterling-LWB+ Wi-Fi 4 with Bluetooth 5.2 module, based upon the Infineon AIROC™ CYW43439 chipset, is the latest member of the successful Sterling-LWB radio family. This embedded module series is available as a System-in-Package (SIP) and two certified module versions, supporting either an on-board chip antenna or a MHF connector for an external antenna. It is designed to meet the demands of medical and industrial IoT connectivity.
LUXEON 3030 2D is a high flux, hot-color targeted 6V package designed for both indoor and outdoor applications. It offers higher efficacy and a higher maximum drive current than competitors enabling LED counts to be reduced. Both the Round and Square versions use two emitters in series to deliver light from the 3.0mm x 3.0mm package. 1/9th micro-binning enables tight color control. Performance is specified at both 65mA and 120mA. Efficacy, output, and reliability in one robust, high-value LED.
https://www.futureelectronics.com/resources/featured-products/lumileds-luxeon-3030-2d
Sensirion SFM3003 Digital Mass Flow Meters are versatile, bidirectional flow meters with low pressure drop, ultra-fast response time, and optimal signal-to-noise ratio (SNR). These next-generation flow meters feature Sensirion's patented CMOSens® technology and an easily integrable digital I2C interface. The signal is internally linearized and temperature compensated.
The ScioSense ENS210 high performance digital output sensor monolithically integrates a highly accurate relative humidity and temperature sensor. The ENS210 comes pre-calibrated in a QFN4 package and includes an I²C slave interface for communication with a host processor.
https://www.futureelectronics.com/resources/featured-products/sciosense-ens210-digital-output-sensor
Typically seen in high-bay industrial applications or street lights, the LUXEON 5050 is an ideal choice for high lumen fixtures that require a high lm/W, but would it require a larger size? The answer is no. The Lumileds LUXEON 5050 is an ideal choice for high lumen fixtures that need to deliver the high lm/W typically seen in high-bay industrial applications or street lights, but also require a smaller fixture size and lighter weight. With the Luxeon 5050, very compact fixtures are possible wit
https://www.futureelectronics.com/resources/new-featured-products/lumileds-luxeon-5050
LUXEON 3030 HE Plus Horticulture LEDs. Based on the company’s leading 3030 LED portfolio and characterized for horticulture, the new options offer high PPF/W, broad spectrum white light that enable grow lights which are productive and economical.
Enable testing of the Microchip Switchtec PFX Gen4 PCIe® Switch in low-lane configurations, The Mahogany PCIe® Switch Evaluation Kit was designed by Unigen in close collaboration with Microchip to ensure customers receive a high-performance, robust platform to conduct testing and validation of the Microchip Switchtec PFX PM40052 Gen4 PCIe Switch for low-lane count applications.
Panasonic’s ECQ-UA Series Metallized Polypropylene Film Capacitors benefit from an original in-house patterned metallization process with a fuse mechanism function. This unique technology delivers stable capacitance levels over the product lifetime and higher reliability of the application.
https://www.futureelectronics.com/resources/featured-products/panasonic-ecq-ua-series
The Infineon BTN9970LV contains one p-channel high-side MOSFET and one n-channel lowside MOSFET with an integrated driver IC in one package. With this single half-bridge IC, the need for a charge pump is eliminated thanks to the p-channel high-side switch, which minimizes EMI. The integrated driver IC features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against over temperature, undervoltage, overcurrent and short circuit. This make
Microchip’s TA100 provides a way for you to implement security into existing systems without requiring costly redesigns. A secure element from the Microchip Crypto Automotive™ portfolio intended for automotive security applications, the TA100 provides support for code authentication (aka secure boot), message authentication via MAC generation, support for trusted firmware updates, multiple key management protocols including TLS and other root-of-trust based operations.
The I-PEX CABLINE®-VS II micro-coaxial connector is fully-shielded with a mechanical lock for secure mating. It is suitable for high data rate transfers of up to 20 Gbps/lane.
If you are driving silicon carbide (SiC) MOSFETs and IGBTs, there are new low-side drivers which add the option of automotive qualification.
https://www.futureelectronics.com/resources/featured-products/littelfuse-gate-drivers
The medical industry depends on many different parts that go into medical products ranging from large equipment to small portable devices. Whether designing for healthcare, clinical, or diagnostic purposes, Panasonic has the solutions for most medical application requirements.
The Infineon TLE4972 is a high precision miniature coreless magnetic current sensor for AC and DC measurements with analog interface and two fast over-current detection outputs. The TLE4972 features Infineon's well-established and robust monolithic Hall technology which enables accurate and highly linear measurement of the magnetic field caused by currents. With a full scale up to ±31 mT, it is possible to measure currents up to 2,000 ampere. All negative effects (e.g. saturation, hysteresis) co
The I-PEX MHF® 7S micro-RF coaxial connector features excellent EMC performance with a fully-shielded design. The connector series is ideal for 5G mmWave applications, VSWR 1.5 max at 15 GHz in a small 2.0 x 2.0 mm footprint.
Power Integrations’ Reference Design Kits (RDKs) are real-world designs optimized for the most popular power conversion / supply applications. The kits are based on Power Integrations’ high performance AC – DC, LED driver, or motor driver ICs. These kits accelerate project development timelines by enabling the developer to evaluate, modify, tune, and test a existing, proven design.
The Microchip MCP1630/V is a high-speed Pulse Width Modulator (PWM) used to develop intelligent power systems. When used with a microcontroller unit (MCU), the MCP1630/V will control the power system duty cycle to provide output voltage or current regulation. The MCU can be used to adjust output voltage or current, switching frequency, maximum duty cycle and other features that make the power system more intelligent.
https://www.futureelectronics.com/resources/featured-products/microchip-mcp1630-mcp19114
The Lumileds LUXEON HL2X is a 2mm2 CSP high power domed emitter designed for outdoor and industrial applications such as street lights, high bay luminaires and sports lighting fixtures with the highest flux and efficiency. The LUXEON HL2X delivers more field usable lumens for optical engineers, meaning Lumileds pays attention to beam angle, field angle, color over angle and optical efficiency to create an outdoor LED with leading optical properties.
https://www.futureelectronics.com/resources/new-featured-products/luxeon-hl2x-high-power-led
They are designed for fast switching to drive power MOSFETs and SiC MOSFET power switches. The NCP51561 offers short and matched propagation delays. Two independent and 5 kVRMS (UL1577 rating) galvanically isolated gate driver channels can be used in any possible configurations of two low side, two high-side switches or a half-bridge driver with programmable dead time.
CDE’s BLH series of DC-Link capacitors have been designed and tested to exceed the industry’s most stringent requirements for high humidity, vibration testing, and thermal cycling. The series is optimised for DC link applications in medium to high-power inverters. Capacitance ranges from 1.0 to 170 µF at 450-1,200 Vdc, with high rms ripple current ratings up to 36 Arms.
Brushed DC motors are composed of a rotor with electromagnets and a stator with permanent magnets. The graphics below illustrate the construction and operation of a simple two-pole brushed DC motor works.
Advanced switch technology with the use of silver contacts to ensure safe and durable operation, Altech Motor Disconnect Switches are one of the smallest switches in the industry (80 A).
AS6C4008 Series 4-Mbit (512 K x 8) 3 V 55 ns CMOS Static RAM - SOIC-32
CAT24C04 Series 4 Kb (32 X 128) 1.7 to 5.5 V I2C CMOS Serial EEPROM - SOIC-8
CAT24C256 Series 256 Kb (32 K x 8) 5.5 V I2C CMOS Serial EEPROM - UDFN-8
CAT24C08 Series 8 kb (1 K x 8) 1.7 - 5.5 V I2C CMOS Serial EEPROM - TSSOP-8
M24C04 Series 4 Kb (512 x 8) 2.5 V SMT Serial I²C Bus EEPROM - SOIC-8
FM31L Series 256 Kb (32 K x 8) 3 V 3 us 2-Wire Integrated Processor - SOIC-14
M93C46 Series 1 Kb (128 x 8 / 64 x 16) 2.5 V Microwire® Serial EEPROM - SOIC-8
CY62147EV30 Series 4 Mb (256 K x 16) 2.2 V 45 ns CMOS Static RAM - FBGA-48
FM25W256 Series 256 Kb (32 K x 8) 3.3V Surface Mount SPI F-RAM Memory - SOIC-8
93LC46 Series 1 Kbit (64 x 16) 5.5 V Microwire Compatible Serial EEPROM - SOIC-8
CY62167EV30 Series 16 Mb (1M x 16/2M x 8) 2.2 - 3.6 V 45 ns Static RAM -VFBGA-48
CY62157EV30 Series 8 Mb (512 K x 16) 2.2 - 3.6 V 45 ns Static RAM - TSOP-48
CY62157EV30 Series 8 Mb (512 K x 16) 2.2 - 3.6 V 45 ns Static RAM - VFBGA-48
CY62148E Series 4 Mb (512 K x 8) 5.5 - 5.5 V 55 ns Static RAM-SOIC-32
CY62136FV30 Series 2 Mb (128 K x 16) 45 ns SMT Static RAM - TSOP II-44
CY62128EV30 Series 1 Mb (128 K x 8) 2.2 - 3.6 V 45 ns Static RAM - SOIC-32
SST39SF010A Series 5.5 V 1 Mb (128 K x 8) 55 ns SMT Flash Memory - PLCC-32
M24C64 Series 64-Kbit (8 K x 8) 2.5 V SMT Serial I²C Bus EEPROM - SOIC-8
M24C16 Series 16 Kb (2 K x 8) 2.5 V SMT Serial I²C Bus EEPROM - SOIC-8
M24C16 Series 16 Kb (2 K x 8) 2.5 V SMT Serial I²C Bus EEPROM - SOIC-8
M24C08 Series 8 Kb (1K x 8) 2.5 V SMT Serial I²C Bus EEPROM - TSSOP-8
M24C02 Series 2 Kb (256 x 8) 2.5 V SMT Serial I²C Bus EEPROM - SOIC-8
M24C01 Series 1 kb (128 x 8) 2.5 V SMT Serial I²C Bus EEPROM -SOIC-8
FM28V Series 256 Kb (32 K x 8) 3.3 V 70 ns Parallel F-RAM Memory - SOIC-28
FM25V10 Series 1 Mb (128 K x 8) 3 V Surface Mount Serial F-RAM Memory - SOIC-8
FM25V02A Series 256-Kbit (32K × 8) 3.6 V SMT Serial (SPI) F-RAM - SOIC-8
FM25V02A Series 256 Kb (32K x 8) 3.6 V 40 MHz Serial (SPI) F-RAM - SOIC-8
FM25L16B Series 16 Kb (2 K x 8) 3.3 V SMT Serial F-RAM Memory - SOIC-8
FM25L04B Series 4 kb (512 x 8) Serial 3 V F-RAM Memory - SOIC-8
FM24W Series 64 Kb (8 K x 8) 2.7 - 5.5 V 3 us Serial F-RAM Memory - SOIC-8
FM24CL64B Series 64Kb (8K x 8) Serial 3 V SMT F-RAM Memory - SOIC-8
FM24CL16B Series 16 kb Serial 5 V F-RAM Memory - SOIC-8
FM24CL04 Series 4 Kb (512 x 8) 3 V 3 us Serial F-RAM Memory - SOIC-8
AT28C64B Series 64 KB (8 K x 8) 5.5 V High-Performance Parallel EEPROM - DIP-28
CAT93C Series 16 kb (1kX16) 3 MHz 1.8 to 5.5 V Microwire Serial EEPROM - SOIC-8
CAT93C Series 4 kb (256X16) 2 MHz 1.8 to 5.5 V Microwire Serial EEPROM - SOIC-8
93LC46 Series 1 Kbit (128 x 8 / 64 x 16) 5.5 V Microwire Serial EEPROM - SOIC-8
93LC46 Series 1 Kbit (64 x 16) 5.5 V Microwire Compatible Serial EEPROM - SOIC-8
M34E02 Series 2 Kb (256 K x 8) 1.7 V SMT Serial I²C Bus EEPROM - TSSOP-8
M24C64-F Series 64 Kb (8 K x 8) 5.5 V SMT Serial I²C bus EEPROM - WLCSP-5
EEPROM Memory IC 8Kb (1K x 8) IC 400kHz 900ns 8-UFDFPN (2x3)
M24C02 Series 2 kB (256 x 8) 1.8 V SMT Serial I2C Bus EEPROM - UFDFPN-8
M24128 Series 128 Kb (16 K x 8) 2.5 V SMT 2 Wire Serial I²C EEPROM - SOIC-8
CAT24C32 Series 32 Kb (4K X 8) 1.8 V - 5.5 V I2C CMOS Serial EEPROM - SOIC-8
Pulse’s embedded antenna line is manufactured for a wide range of frequencies including Cellular, WiFi, BT, ISM, GPS/GNSS/Bediou and many more. They are ideal for a variety of applications such as smart meters, industrial remote control, and ISM band equipment.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 25th anniversary of the opening of the company's offices in Madrid, Spain.
Future’s Long Island branch first opened its doors in 1987. The office is located just off Veterans Memorial Highway in Hauppauge, making it very accessible to the area’s suppliers and customer base.
https://express-press-release.net/news/press-releases-tagged-with/robert-miller
Future Electronics outperformed all other distributors across the world, generating industry leading sales growth on behalf of Abracon while effectively supported their customers' needs in 2021.
Future Electronics, a global leading distributor of electronic components, recently won the Americas Distributor of the Year award for 2021 from Geyer Electronic, a leading manufacturer of frequency products, quartz crystals, oscillators, and ceramic resonators. Robert Miller, President of Future Electronics, thanked everyone who contributed to the company’s industry-leading performance on behalf of Geyer in 2021. “Geyer’s dedication to service and support were key factors in Future Electronic
https://www.linknovate.com/affiliation/future-electronics-104389/all/
Future Electronics, a global leading distributor of electronic components, recently celebrated the 30th anniversary of the opening of the company's offices in Puerto Rico. Future Electronics was founded in Montreal in 1968 by company President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston.
Robert Miller, President of Future Electronics, congratulated the Puerto Rico team on their 30-year milestone, and thanked everyone for their contributions to the success of the branch.
Puerto Rico was considered the Silicon Valley of the Caribbean in the late 90s, and tier-one companies including Intel and Western Digital had manufacturing facilities there. Today Puerto Rico is considered a small-sized market in the semiconductor industry, with Telecom, Medical and Industrial sectors the focus.
The Puerto Rico Branch was opened in 1992 by local Engineer Franklyn Vega as the GM handed to Enrique Gonzalez in 2001, GSM for the following 18 years.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 30th anniversary of the opening of the company's offices in Puerto
The Detroit team is a mix of more recent hires and seasoned industry vets, with experience ranging from 2 to 32 years. This diversity contributes to the team's dynamic, blending fresh perspectives with time-tested procedures, and contributing to exceptional customer service and record growth.
Future Electronics' Detroit branch first opened its doors in 1987. The office is centrally located in Novi, supporting the eastern half of the state of Michigan.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 35th anniversary of the opening of the company's office in Detroit, Michigan.
Future Electronics was founded in Montreal in 1968 by company President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston. Future Electronics' Detroit branch first opened its doors in 1987. The office is centrally located in Novi, supporting the eastern half of the state of Michigan.
Robert Miller, President of Future Electronics, congratulated the Detroit team on their 35-year milestone, and thanked everyone for their contributions to the success of the branch. the number of semiconductors in vehicles continuing to rise, and with the dramatic growth of hybrid and electric vehicles, Shelton believes Future Detroit is uniquely positioned to make significant contributions to this changing market.
The Detroit team is a mix of more recent hires and seasoned industry vets, with experience ranging from 2 to 32 years. This diversity contributes to the team's dynamic, blending fresh perspectives with time-tested procedures, and contributing to exceptional customer service and record growth.
Future Electronics was founded in Montreal in 1968 by company President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston. Future Electronics' Detroit branch first opened its doors in 1987. The office is centrally located in Novi, supporting the eastern half of the state of Michigan.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 35th anniversary of the opening of the company's office in Detroit, Michigan.
Robert Miller, President of Future Electronics, congratulated the Detroit team on their 35-year milestone, and thanked everyone for their contributions to the success of the branch. Future Electronics is a global leader in electronics distribution, recognized for providing customers with global supply chain solutions, custom-tailored engineering services and a comprehensive suite of passives and semiconductor products.
Future Electronics outperformed all other global distributors, generating significant sales on behalf of Nexperia across all regions while effectively supported their customers' needs in 2021.
Future Electronics, a global leading distributor of electronic components, has been awarded North American Distributor of the Year for 2021 by Nexperia, a global producer of semiconductors.
Nexperia extensive portfolio includes diodes, bipolar transistors, ESD protection devices, MOSFETs, GaN FETs, Analog & logic ICs. The company is headquartered in Nijmegen, the Netherlands, and is a subsidiary of Wingtech Technology Co., Ltd.
Nexperia is a leading expert in the high-volume production of essential semiconductors, components that are required by every electronic design in the world. The company's extensive portfolio includes diodes, bipolar transistors, ESD protection devices, MOSFETs, GaN FETs, Analog & logic ICs.
Future Electronics outperformed all other global distributors, generating significant sales on behalf of Nexperia across all regions while effectively supported their customers' needs in 2021.
Future Electronics, a global leading distributor of electronic components, has been awarded North American Distributor of the Year for 2021 by Nexperia, a global producer of semiconductors.
Robert Miller, President of Future Electronics, congratulated the Philippines team on their 25-year milestone, and thanked everyone for their contributions to the success of the branch. The Manila branch has seen significant growth since 2017, fueled by account development, new customer acquisition and sustained DC efforts.
Founded by Robert Miller in 1968, Future Electronics has over 5,500 employees and operates in 170 offices in 44 countries around the world. Robert Miller, President of Future Electronics, congratulated the company’s Philippines branch, which is celebrating its 25th anniversary this year.
Robert Miller, President of Future Electronics, congratulated the Philippines team on their 25-year milestone, and thanked everyone for their contributions to the success of the branch.
The Manila branch has seen significant growth since 2017, fueled by account development, new customer acquisition and sustained DC efforts.
Future Electronics Philippines remains focused on keeping morale up, providing relevant training, and ensuring team members keep their eyes on the goal. Robert Miller, President of Future Electronics, congratulated the Philippines team on their 25-year milestone, and thanked everyone for their contributions to the success of the branch.
The Manila branch has seen significant growth since 2017, fueled by account development, new customer acquisition and sustained DC efforts. "Without our team's dedication, resilience, and hard work, it would not have been possible to achieve and even exceed our targets during these past years," Jason said.
Future Electronics Philippines is in Alabang Muntinlupa City, in the southern part of Manila. The office is near to the airport, walking distance from hotels, and just 20 minutes from most of Future's OEM, EMS and R&D customers. Future Electronics Philippines Office as one of the best
Future Electronics was founded in Montreal in 1968 by company President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston. Robert Miller, congratulated the company’s Philippines branch, which is celebrating its 25th anniversary this year.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 25th anniversary of the opening of the company's offices in the Philippines.
Future Electronics, a global leading distributor of electronic components, recently won the Americas Distributor of the Year award for 2021 from Geyer Electronic, a leading manufacturer of frequency products, quartz crystals, oscillators, and ceramic resonators.
Robert Miller, President of Future Electronics, congratulated the Minneapolis team on their 35-year milestone, and thanked everyone for their contributions to the success of the branch.
Future Electronics, a global leading distributor of electronic components, has been awarded Passives Distributor of the Year for 2021 by Vishay Intertechnology, a global manufacturer of semiconductors and passive electronic components.
Future Electronics, a global leading distributor of electronic components, has been awarded Global Demand Creation Distributor of the Year for 2021 by u-blox, a leading global provider of positioning and wireless communication technologies and services.
Future Electronics Wins Dialight’s 2021 Top Global Sales Distributor of the Year Award. Dialight's Vice President and General Manager Matt Boudiette presented the award to Future Electronics at the Electronic Distribution Summit in Las Vegas, Nevada last month.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 35th anniversary of the opening of the company's office in Fairfield, New Jersey. Future Electronics was founded in Montreal in 1968 by President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston.
Future Electronics Philippines is in Alabang Muntinlupa City, in the southern part of Manila. The office is near to the airport, walking distance from hotels, and just 20 minutes from most of Future’s OEM, EMS and R&D customers.
https://express-press-release.net/news/press-releases-tagged-with/robert-miller
Future Electronics, a global leading distributor of electronic components, has been awarded Americas Fastest Growing Distributor for 2021 by Abracon, an industry leader in electronic components.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 35th anniversary of the opening of the company's office in Fairfield, New Jersey. Future Electronics was founded in Montreal in 1968 by President Robert Miller. It expanded into the United States in 1972, opening its first American office in Boston.
Robert Miller, President of Future Electronics, congratulated the Fairfield team on their 35-year milestone, and thanked everyone for their contributions to the success of the branch.
This consistent growth was supported by Future Electronics' global footprint, IT infrastructure, internal processes, customer programs, customer support, and the company's expanded line card.
Future Electronics' Fairfield branch first opened its doors in 1987. The region is what's considered a medium-sized market in the semiconductor industry, with customers heavily weighted toward industrial, military, robotics, and EMS spaces.
Robert Miller, President of Future Electronics, congratulated the Fairfield team on their 35-year milestone, and thanked everyone for their contributions to the success of the branch.
Future Electronics' Fairfield branch first opened its doors in 1987. The region is what's considered a medium-sized market in the semiconductor industry, with customers heavily weighted toward industrial, military, robotics, and EMS spaces.
Future Electronics, a global leading distributor of electronic components, recently celebrated the 35th anniversary of the opening of the company's office in Fairfield, New Jersey.
Future Electronics' Fairfield branch first opened its doors in 1987. The region is what's considered a medium-sized market in the semiconductor industry, with customers heavily weighted toward industrial, military, robotics, and EMS spaces.
Future Electronics, a global leading distributor of electronic components, has been awarded Top Global Sales Distributor of the Year for 2021 by Dialight, a global leader in industrial LED lighting solutions.
Dialight's Vice President and General Manager Matt Boudiette presented the award to Future Electronics at the Electronic Distribution Summit in Las Vegas, Nevada last month.
Future Electronics was recognized as the best-performing distributor globally, winning significant new business from existing as well as new Dialight customers.
The award was based on combined total sales and sales growth across North America, EMEA and Asia. This is the second time that Future has won the award.
